Need help?Do you have a question about the Hitachi EX 1200-6 and is the answer not in the manual?
General| Brand | Hitachi |
|---|---|
| Model | EX 1200-6 |
| Category | Excavators |
| Language | English |
Record the Type and Manufacturer's Number for the engine.
Record the Type and Manufacturer's Number for the travel motors.
Record the Type and Manufacturer's Number for the swing motor.
Record the Type and Manufacturer's Number for the hydraulic pumps.
Record the Type and Manufacturer's Number for the boom.
Record the Type and Manufacturer's Number for the arm.
Record the Type and Manufacturer's Number for the bucket.
Learn to identify safety alert symbols and understand their meaning.
Learn the meaning of signal words like DANGER, WARNING, CAUTION, IMPORTANT, and NOTE.
Read and follow all safety signs and messages in the manual.
Be prepared for fires or accidents; keep first aid and fire extinguishers ready.
Wear appropriate clothing and safety equipment for the job.
Use hearing protection to prevent hearing loss from loud noise.
Inspect the machine carefully each day before starting.
Maintain a clean cab and avoid hazards from stored items or decorations.
Use handholds and steps for safe mounting and dismounting.
Adjust the seat for proper posture and control operation.
Secure the machine by lowering attachments and setting controls before leaving the seat.
Always wear the seat belt securely fastened when operating.
Be aware of bystanders, use alarms, and ensure good visibility.
Handle starting fluid carefully due to its flammability.
Operate the machine only when seated in the operator's seat.
Follow correct procedures for jump starting to avoid explosions.
Only the operator should be on the machine to ensure safe operation.
Investigate worksite, clear people/obstacles, and be aware of surroundings.
Assess job site configuration and ground conditions to prevent accidents.
Equip OPG guard in areas with falling stones or debris.
Do not install attachments exceeding the machine's specified weight.
Use clear, commonly known signals for jobs involving multiple machines.
Confirm undercarriage position relative to operator before driving.
Confirm travel direction, avoid obstructions, and be cautious on slopes.
Follow procedures to park the machine safely and prevent rollaways.
Always look around and use signals to prevent accidents during backing or swinging.
Set up barriers to prevent people from entering the operating or swing radius.
Do not lift, move, or swing the bucket over anyone or a truck cab.
Position machine perpendicular to excavation edges and be ready to retreat.
Be careful on grades, reduce speed, avoid changing direction, and keep bucket low.
Avoid excavating under high banks to prevent collapse or landslides.
Check for underground cables and gas lines before digging to prevent explosions.
Be careful to avoid hitting overhead obstacles like bridges with the boom or arm.
Maintain a safe distance from electric lines to prevent electrocution.
Stop operation during lightning; stay in the cab if inside.
To Next Page
