English
10
OPERATION AND MAINTENANCE
NOTE:
The information contained in this Instruction Manual is designed to assist you in the safe
operation and maintenance of the power tool.
Some illustrations in this Instruction Manual may show details or attachments that differ
from those on your own power tool
NAME OF PARTS
Motor Single Phase, Series Commutator Motor
Power source Single Phase 115V AC 60 Hz
Current 5 A
Reversible Yes
No-load speed 0–2900 rpm
Drill chuck capacity 1/2" (13mm)
Steel 1/2" (13mm)
Capacity Concrete 5/8" (16mm)
Wood 1" (25mm)
Weight (Without Cord) 3.52 lbs (1.6 kg)
SPECIFICATIONS
Keyless Drill Chuck
Change lever Nameplate
Housing
Trigger Switch
Reversing
Switch
Side Handle
Depth Gauge
Fig. 3
To Next Page
Loading...
