Hitachi FDV 20VB - DETAILED PARTS LIST

*
ALTERNATIVE PARTS
ITEM
NO.
CODE NO.
DESCRIPTION REMARKS
NO.
USED
PARTS
FDV 20VB
2 -- 01
1 995-344 FLAT HD. SCREW (A) (LEFT HAND) M6X25 1
* 2 987-576 CHUCK WRENCH FOR 13VLB-D,13VLR-D 1 FOR 13VLRB-D
* 3 DRILL CHUCK 13VLRB-D 1 INCLUD.2
* 3 319-546 DRILL CHUCK 13VLRE-N (W/O CHUCK WRENCH) 1
4 319-601 SPINDLE AND GEAR SET 1
5 608-VVM BALL BEARING 608VVC2PS2L 2
6 319-605 SECOND PINION 1
7 319-604 CHANGE KNOB 2
8 963-226 SPRING (A) 1
9 319-603 CHANGE PLATE 1
10 319-602 HOLDER 1
11 608-DDM BALL BEARING 608DDC2PS2L 1
* 12 360-548U ARMATURE ASS’Y 110V-115V 1 INCLUD.5,11,13
* 12 360-548E ARMATURE 220V-230V 1
* 12 360-548F ARMATURE 240V 1
13 319-609 DUST SEAL 1
* 14 340-496C STATOR 110V-115V 1
* 14 340-496E STATOR 220V-230V 1
* 14 340-496F STATOR 240V 1
15 303-655 INTERNAL WIRE (B) (GRAY) 1
16 319-612 INTERNAL WIRE (WHITE) 1
17 319-611 INTERNAL WIRE (RED) 1
18 303-656 INTERNAL WIRE (C) (BLACK) 1
* 19 319-644 HOUSING (A).(B) SET (MOSS GREEN) 1
* 19 319-615 HOUSING (A).(B) SET (OFF BLACK GREEN) 1
* 20 NAME PLATE 1
21 302-086 TAPPING SCREW (W/FLANGE) D4X20 (BLACK) 9
22 319-607 SHIFT ARM 1
23 999-041 CARBON BRUSH (1 PAIR) 2
24 955-203 BRUSH HOLDER 2
* 25 314-916 SPEED CONTROL SWITCH (2P) 100V-115V 1
* 25 314-921 SPEED CONTROL SWITCH (2P) 220V-240V 1
* 26 319-614 INTERNAL WIRE (BROWN) 1
* 26 319-643 CHOKE COIL (BROWN) 1 FOR CHN,SAF,EUROPE,OCEANIA
27 319-606 SHIFT LEVER 1
28 319-608 SHIFT PIN 1
29 875-638 O-RING (S-12) 1
* 30 HITACHI LABEL 1
31 LABEL 1
* 32 981-373 TUBE (D) 2 FOR CORD
* 33 307-217 CORD ARMOR D7.2 1
* 33 303-662 CORD ARMOR D8.8 1
34 960-266 CORD CLIP 1
35 305-812 TAPPING SCREW (W/FLANGE) D4X16 (BLACK) 2
* 36 303-667 CORD 1
* 36 500-409Z CORD 1 (CORD ARMOR D8.8) FOR CHN,SAF,EUROPE
* 36 500-423Z CORD 1 (CORD ARMOR D8.8) FOR KUW
* 36 500-447Z CORD 1 (CORD ARMOR D8.8) FOR SYR,CHI
* 36 500-439Z CORD 1 (CORD ARMOR D8.8) FOR OCEANIA
* 36 500-436Z CORD 1 (CORD ARMOR D7.2) FOR GBR
* 36 500-240Z CORD 1 (CORD ARMOR D8.8) FOR USA,CAN