--- 3 ---
Type of motor
Speed No-load
Full-load
Impact rate No-load
Full-load
Type of switch
Type of handle
Enclosure
Cord
Weight Net
Gross
Packaging
Standard accessories
Optional accessories
Max. capacity
Drill chuck
5. SPECIFICATIONS
Low speed: 20 mm (3/4")/ High speed: 13 mm (1/2")
Low speed: 13 mm (1/2")/ High speed: 8 mm (5/16")
Low speed: 40 mm (1-9/16")/ High speed: 25 mm (1")
UNF 1/2" --- 20
1.5 --- 13 mm
AC single phase 50/60 Hz
Model
Item
FDV 20VB
Power source
Voltage, current and input
AC single phase series commutator motor
0 --- 1,300/3,000/min
0 --- 940/2,180/min
0 --- 20,800/48,000/min
0 --- 15,000/35,000/min
Trigger switch w/stopper (variable speed)
Pistol type
Polycarbonate resin
2-core cabtire cord
Nominal sectional area: 0.75 mm
2
Length: 2.5 m (8.2 feet)
2.2 kg
3.9 kg
Corrugated cardboard box with plastic case
Chuck wrench* ...........................................1
Side handle ass'y .......................................1
Depth stopper ............................................1
Plastic case .............................................1
Item Code No.
TCT drill bit set (Dia. 4, 6, 8, 10) ................1 each 879344
HSS drill bit set (Dia. 2, 3.2, 4.8, 6.5).........1 each 879345
Concrete
Steel
Wood
Mount type
Chucking dia.
Voltage (V)
Current (A)
Power input (W)
110
115
220
230
240
750
7.2
6.9
3.6
3.5
3.1
720
* Ordinary drill chuck with chuck key
To Next Page
Loading...
