Hitachi G 13SB3 - User Manual

Model
Disc Grinder
Modèle
Meuleuse à disque
Modelo
Amoladora angular
G 12SA3 • G 13SB3
DOUBLE INSULATION
DOUBLE ISOLATION
AISLAMIENTO DOBLE
G12SA3
INSTRUCTIONS DE SECURITE ET MODE D’EMPLOI
AVERTISSEMENT
Une utilisation INCORRECTE OU DANGEREUSE de cet outil motorisé peut entraîner la
mort ou de sérieuses blessures corporelles!
Ce mode d’emploi contient d’importantes informations à propos de la sécurité de ce produit.
Prière de lire et de comprendre ce mode d’emploi AVANT d’utiliser l’outil motorisé. Garder ce
mode d’emploi à la disponibilité des autres utilisateurs et propriétaires avant qu’ils utilisent
l’outil motorisé. Ce mode d’emploi doit être conservé dans un endroit sûr.
SAFETY INSTRUCTIONS AND INSTRUCTION MANUAL
WARNING
IMPROPER OR UNSAFE use of this power tool can result in death or serious bodily injury!
This manual contains important information about product safety. Please read and
understand this manual BEFORE operating the power tool. Please keep this manual
available for other users and owners before they use the power tool. This manual should be
stored in safe place.
INSTRUCCIONES DE SEGURIDAD Y MANUAL DE INSTRUCCIONES
ADVERTENCIA
¡La utilización INAPROPIADA O PELIGROSA de esta herramienta eléctrica puede resultar
en lesiones de gravedad o la muerte!
Este manual contiene información importante sobre la seguridad del producto. Lea y com-
prenda este manual ANTES de utilizar la herramienta eléctrica. Guarde este manual para
que puedan leerlo otras personas antes de utilizar la herramienta eléctrica. Este manual
debe ser guardado en un lugar seguro.
00BookG12SA3.indb100BookG12SA3.indb1 2016/02/1214:34:462016/02/1214:34:46

Summary

IMPORTANT SAFETY INFORMATION

MEANINGS OF SIGNAL WORDS

Defines signal words like WARNING and CAUTION used in the manual.

SAFETY

GENERAL POWER TOOL SAFETY WARNINGS

Provides essential safety rules for operating power tools.

FUNCTIONAL DESCRIPTION

NAME OF PARTS

Identifies and illustrates the main components of the grinder.

ASSEMBLY AND OPERATION

APPLICATIONS

Lists the intended uses and applications for the grinder.

PRIOR TO OPERATION

Details essential checks and preparations before operating the tool.

MAINTENANCE AND INSPECTION

REPLACING THE DEPRESSED CENTER WHEEL

Instructions for replacing the worn-out depressed center wheel.

INSPECTING THE SCREWS

Guidance on regularly checking and tightening all screws for safety.

ACCESSORIES

STANDARD ACCESSORIES

Lists the standard accessories included with the power tool.

Hitachi G 13SB3 Specifications

General

Wheel Diameter	125 mm
No Load Speed	11000 rpm
Weight	1.9 kg
Power Input	730W
Spindle Thread	M14 x 2
Cable Length	2.5 m