Need help?Do you have a question about the Hitachi HNAS 5200 and is the answer not in the manual?
Follow guidelines to prevent hardware faults caused by electrostatic discharge during handling.
Adhere to safety practices for handling equipment, including lifting and rack installation.
Ensure safe operation by following guidelines for power sources, grounding, and voltage.
Covers 10GbE cluster, data network, and management Ethernet ports.
Identifies components that can be replaced by certified engineers, not end-users.
Lists components that can be replaced without shutting down the server.
Guidelines and procedures for recovering or replacing server drives.
Instructions for rebooting or shutting down the server or cluster using NAS Manager.
Process to restart a non-responsive server via OS console or serial port.
Steps for safely powering down the server for shipment or long-term storage.
Obtaining backups, diagnostics, firmware levels, and license keys from the old server.
Procedures for shutting down the server and configuring the replacement server.
Steps to finalize and verify the replacement server's configuration and connectivity.
Follow guidelines to prevent hardware faults caused by electrostatic discharge during handling.
Adhere to safety practices for handling equipment, including lifting and rack installation.
Ensure safe operation by following guidelines for power sources, grounding, and voltage.
Covers 10GbE cluster, data network, and management Ethernet ports.
Identifies components that can be replaced by certified engineers, not end-users.
Lists components that can be replaced without shutting down the server.
Guidelines and procedures for recovering or replacing server drives.
Instructions for rebooting or shutting down the server or cluster using NAS Manager.
Process to restart a non-responsive server via OS console or serial port.
Steps for safely powering down the server for shipment or long-term storage.
Obtaining backups, diagnostics, firmware levels, and license keys from the old server.
Procedures for shutting down the server and configuring the replacement server.
Steps to finalize and verify the replacement server's configuration and connectivity.
General| Model | HNAS 5200 |
|---|---|
| Category | Network Storage Server |
| Block Protocols | iSCSI |
| High Availability | Yes |
| Processor | Intel Xeon |
| Network Interfaces | 10GbE |
| RAID Support | RAID 6, RAID 5 |
| Operating System | Hitachi NAS Platform |
| Architecture | Scale-out NAS |
| Form Factor | 2U |
| File Protocols | NFS, SMB, CIFS, FTP, HTTP |
| Scalability | Scale-out architecture, supports clustering |
To Next Page