Hitachi KM 12VC User Manual

1/2
3/8
1/4
3/8
INSTRUCTIONS DE SECURITE ET MODE D’EMPLOI
AVERTISSEMENT
Une utilisation INCORRECTE OU DANGEREUSE de cet outil motorisé peut entraîner la
mort ou de sérieuses blessures corporelles !
Ce mode d’emploi contient d’importantes informations à propos de la sécurité de ce
produit. Prière de lire et de comprendre ce mode d’emploi AVANT d’utiliser l’outil
motorisé. Garder ce mode d’emploi à la disponibilité des autres utilisateurs et
propriétaires avant qu’ils utilisent l’outil motorisé. Ce mode d’emploi doit être conservé
dans un endroit sûr.
SAFETY INSTRUCTIONS AND INSTRUCTION MANUAL
WARNING
IMPROPER OR UNSAFE use of this power tool can result in death or serious bodily
injury!
This manual contains important information about product safety. Please read and
understand this manual BEFORE operating the power tool. Please keep this manual
available for other users and owners before they use the power tool. This manual should
be stored in safe place.
INSTRUCCIONES DE SEGURIDAD Y MANUAL DE INSTRUCCIONES
ADVERTENCIA
¡La utilización INAPROPIADA O PELIGROSA de esta herramienta eléctrica puede resultar
en lesiones de gravedad o la muerte!
Este manual contiene información importante sobre la seguridad del producto. Lea y
comprenda este manual ANTES de utilizar la herramienta eléctrica. Guarde este manual
para que puedan leerlo otras personas antes de utilizar la herramienta eléctrica. Este
manual debe ser guardado en un lugar seguro.
M 12VC • M 12SC
KM 12VC • KM 12SC
Model Router
Modèle Toupie
Modelo Fresadora
M12VC

Hitachi KM 12VC Specifications

General

Motor Speed / No Load Speed	8, 000 - 24, 000 RPM
Base Type	Fixed
Voltage	120V
Cord Length	6 ft
Depth Adjustment	Yes
Collet Size	1/4 inch
Amperage	11 Amps

Summary

Safety Information

Meanings of Signal Words

Explains the meaning of WARNING, CAUTION, and NOTE signals.

General Safety Rules

Provides general safety rules for work area, electrical safety, and personal safety.

Specific Safety Rules and Symbols

Details specific safety rules and symbols for tool operation and personal protection.

Extension Cord Use

Provides guidance on selecting and using extension cords for the tool.

Tool Description and Setup

Parts and Specifications

Identifies tool parts and lists technical specifications for the models.

Applications and Preparation

Outlines applications and essential checks before using the tool.

Router Operation

Installing and Removing Bits

Step-by-step instructions for installing and removing cutting bits.

Installing the Motor Housing

Instructions for correctly attaching the motor housing to the base.

Adjusting Depth of Cut

Explains how to set and adjust the cutting depth of the router.

Adjusting Rotation Speed

Describes how to adjust the rotation speed on the M12VC model.

Guiding the Router

Explains how to use template guides and straight guides for cutting.

Cutting Procedures

Safe operational steps for making cuts with the router.

Maintenance and Accessories

Maintenance and Inspection

Covers routine checks, brush replacement, and authorized servicing for tool longevity.

Accessories Overview

Lists standard and optional accessories for enhancing tool functionality.

Plunge Base Operations

Replacing the Base

Instructions for removing the fixed base and installing the plunge base.

Plunge Base Depth and Limit Adjustment

Details setting cutting depth and upper limiting nuts for the plunge base.

Plunge Base Cutting Procedures

Safety precautions and operational steps for performing cuts with the plunge base.