Need help?Do you have a question about the Hitachi L-2100 and is the answer not in the manual?
General| Frequency | 50 Hz |
|---|---|
| Power Source | Electric |
| Type | Centrifugal |
| Voltage | 220 V |
| Phase | Single |
| Outlet Diameter | 50 mm (2 inch) |
| Inlet Diameter | 50 mm (2 inch) |
| Suction Inlet | 50 mm (2 inch) |
| Discharge Outlet | 50 mm (2 inch) |
Safety warning regarding the weight of the instrument during handling.
Description of the front panel controls, keypad, and indicator LEDs.
Detailed technical specifications including feed system, pressure, and flow rate for L-2100.
Detailed technical specifications including feed system, pressure, and flow rate for L-2130.
Guide to creating, editing, and managing pump programs for automated analysis.
Crucial safety precautions when working with flammable chemicals and vapors.
Procedures for performing analyses, including gradient operations.
Detailed steps for program generation, deletion, addition, and correction.
Procedure for adjusting the pump pressure zero point.
Setting parameters for calibrating the instrument's flow rate and pressure.
Setting up event codes for external devices, pump actions, or signals.
Method and required items for verifying instrument performance and specifications.
Procedure to check the reproducibility of the injection volume and flow rate.
Guidelines for routine maintenance and inspection to ensure optimal performance.
Lists error messages displayed on the LCD and provides corresponding solutions.
A general guide for resolving common pump issues based on symptoms and causes.
To Next Page