Hitachi PC-ARFP1E - SETTING METHOD; Temperature Setting; Fan Speed Setting; Setting Notes

12 SETTING METHOD
12.1 TEMPERATURE SETTING
1 Press “ ” or “ ” and select “TEMP”.
A/C
MODE SPEED TEMP
COOL
HIGH
SPEED ADJ
Meeting Room
OK
2 By pressing “ ”, the temperature is increased by 1
o
C. (Max.
30
o
C). By pressing “ ”, the temperature is decreased by
1
o
C. (Cooling, Dry, Air Flow operation: Min. 19
o
C) (Heating
operation: Min. 17
o
C).
A/C
MODE SPEED TEMP
COOL
HIGH
SPEED ADJ
Meeting Room
OK
.
? NOTE
The max/min temperature is available to change by setting the cooling
lower limit for setting temperature (or heating upper limit for setting
temperature) from the function selection.
12.2 FAN SPEED
1 Press “ ” or “ ” and select “SPEED”.
A/C
MODE ADJTEMP
MODE SPEED TEMP
COOL
HIGH
Meeting Room
OK
2 By pressing “ ” or “ ”, the fan speed will be changed as
follows.
A/C
MODE ADJTEMP
MODE SPEED TEMP
COOL
LOW
Meeting Room
OK
? NOTE
• During the dry operation, the fan speed is automatically changed to
“LOW” and cannot be changed to other fan speed. (“LOW” will NOT
be displayed on LCD (liquid crystal display) at this time. The present
setting condition will be displayed on LCD).
• The fan speed settings “HIGH H” and (or) “AUTO” may not be
available depending on the indoor unit type.
ENGLISH
SETTING METHOD
PMML0404A rev.1.1 - 06/2022
21