NN1-1536 Rev.03.1
ATU-PVT-PCM1 Instruction Manual
Revision History
Revision date Author Revision No. Description
Feb. 26th, 2018
W.Bodaiji R00 First Issue.
July
3rd, 2018
W.Bodaiji R00.1 Revise the word as shown below.
Chapter 1-2 Doing – Not doing
Chapter 2-1 Single sample holder – Single tube holder
Through put – throughput
Disconnected – OFF Line
Caution of the sentence of protection barrier.
Alarm part 101,201, 901 find - found
Oct. 15th, 2018
T. Yoshida R01
Revised warning labels.
Before Reading This Manual, page 2
Revise the word as shown below.
Chapter 1-1 CAUTION – NOTICE
Chapter 1-2 CAUTION – NOTICE
May
17
th
, 2019 T. Yoshida R02
Revised warning labels and safety messages.
Revise CE label, Chapter 1, page 10
Change term: “specimen” to “sample”.
Aug. 30
th
, 2019
W. Bodaiji
Y. Thuresson
R02.1 Change the term “Signal Tower” to “Status Light”
Change the term “Sample container” to “Sample tube”
Add new warning “Personal injury and infection due to
sharps, rough edges, and/or moving parts” (Chapter 1,
page 3)
Modify “CE Label” description(Chapter 1, page 9)
Combined 1-2”Safety Precautions” and 1-4”Usage
Precautions” as 1-2 Safety Precautions(Chapter 1-2,
page 2 to 4)
Add “Clean-up Procedures”(Chapter 1-5)
Add 11mm outer diameter tube to “Applicable Sample
Tubes” (Chapter 2, page 2)
Change layout of warning/caution (Chapter 1, page 2)
Add “Operating Conditions” (Chapter 2, page 2)
Add “Applicable barcodes” (Chapter 2-1, page 3)
Jun. 30
th
, 2021
Y. Thuresson R03 Added the text “Original Instructions”.
Updated the product name.
Deleted “Automation Solutions GmbH” from Roche
company name.
(Front cover)
Changed the company names to “Roche Diagnostics”
and “Hitachi Ltd”.
Added barcode reader product label to “Important Safety
Information (Warning Labels)”.
Added“(EU)2015/863” to RoHS directive.
Added IVD Regulation to “Norms and standards”.
Added the wording “Unit Relocation” and “Removal From
Use” to “Unit disposal Notification”.
To Next Page