Screw
Ev-drain
Reciever
How to operation (Continue)
Maintenance
Automatic defrosting mode
Automatic defrosting modeSemi-auto defrosting mode
How to change defrosting modes.
Switching from automatic to Semi-auto Switching from Semi-auto to automatic
Push Defrost Mode button for
3 seconds to switch its mode.
Push Defrost Mode button for
3 seconds to switch its mode.
Refrigerators are set to automatic defrosting before delivery.
There may be water from defrosting ows into chiller case.
In case of power failure or plug taked-o, the refrigerator will start with automatic defrosting mode.
If defrost mode button is pushed while the temperature in the refrigerator is high,
the lamp will be blinking simultaneously when pushed.
Note
LED o LED o
LED on
Press 3 sec
Press 3 sec
LED on
DEFORST MODE (Continue)
Semi-auto defrosting mode
7