6
How to operation
Temperature Control
Name and Functions of Display
ECO mode indicator
Dual Fan indicator
Child Lock indicator
Temperature display
Refrigerator/Freezer select button
R : Refrigerator F : Freezer
Energy Saving display
Quick Freezing display
Temperature setting button
Energy Saving / Quick Freezing mode select button
NOTICE
Ɣ
If you unplug the power plug or a power failure occurs and
then the refrigerator restarts, the temperature display and
each setting will be automatically resumed***. However,
“Quick Freezing” operation will be cancellend.
Ɣ
Approximately 30 seconds after the end of operation,
indicator LED become unlit (ECO and Dual Fan LED become dim).
Ɣ
To confirm indicator setting, open the refrigerator door or touch
any button. The indicator LED become light again.
Ɣ
Response of the touch panel may change depending on the
surrounding temperature, humidity, physical condition of the
user or operation status of the adjoining electric product.
Ɣ
The panel may not respond if it is wet or dirty.
***
There must setting more than 45 seconds before unplug
the power or power failure. otherwise the temperature display
shown as before setted.
The display is indicating the status of temperature setting.
( Sound “ Pi ” )
( Sound “ PiPi ” ) ( Sound “ Pi ” )
Cold
Normal
Coldest
Refrigerator Compartment
Touch “R/F
Select ” button
“R” light is on
Touch “Temp.
Control
” button
to setting a temperature
When the food is too cold For normal use When cooling food more
coldly or quickly
Cold
Normal
Coldest
Touch “R/F
Select ” button
“F” light is on
Touch “Temp.
Control ” button
to setting a temperature
Freezer Compartment
When storing neither
frozen food nor ice cream
For normal use
When making ice quickly or making
frozen food quickly. Or,a surrounding
temperature is high and the Freezer
compartment is not cold enough.
The display is indicating the status of temperature setting.
Fine adjustment of the temperature {Refrigerator compartment / Freezer compartment}
To cancel the fine adjustment of the temperature
Touch “Temp Control” button for 5 seconds until “PiPi!” is heard,and you can set temperature by normal step (5 levels)
Touch “R/F Select” and “Temp control” to make as adjustment.
Each time you touch the button,the corresponding indicator lamp change in order shown below (9 levels)
To set the fine adjustment of the temperature
Touch “Temp Control” button for 5 seconds until “Peep” is heard.
( Lighting Blinking Turned off)
Indication
lamp
Cold
Pi! Pi! Pi! Pi! Pi! Pi! Pi! Pi!PiPi!
Setting
Sound
ColdestNormal
( Sound “ Pi ” ) ( Sound “ PiPi ” ) ( Sound “ Pi ” )
This function is subjected to change according model type.
Factory setting, the adjustment temperature by normal step ( 5 levels ).
NOTICE
To Next Page
Loading...
Need help?
General
