– 5 –
[Indoor unit installation]
CAUTION
Always install the indoor unit at level. If the
indoor unit is inclined, water may leak.
!
Be sure to completely
seal any gap with putty.
●
The connecting pipe, no
matter big or small,
should all be insulated
with insulation pipe and
then wrapped with vinyl
tape. (The insulator will
deteriorate if it is not
wrapped with tape).
Drain pipe must be installed
separately. Insulate indoor part
of pipe to prevent condensation.
The indoor piping should be
insulated with the enclosed
insulation pipe. (If the
insulator is insufficient,
please use commercial
products.)
●
“Height difference” and “Piping length” of Indoor and Outdoor unit are different by Outdoor unit.
Please refer to the installation manual in Outdoor unit.
Electrical
box
Air outlet
Filter
Air inlet
Wired
Remote
controller
To Next Page
Loading...
