·
·
When the activity level in a room is detected,the infrared sensor will be in operation.
And a low-voltage output from the infrared sensor P.W.B. will be magnified by the amplifier comparator
and be transformed the digital signal to microcomputer(IC601).
(The infrared sensor output is [Hi] when the activity level is not detected. On the contrary,output is [Lo].)
13. Infrared human presence sensor circuit
With the infrared sensor,the air conditioner can detect the activity level in a room and adjust the
temperature and humidity automatically,thus achieving the purpose of energy saving.
Fig.13 1
Sensor P.W.B
Indoor main P.W,B
Microcomputer
Infrared sensor
To Next Page
Loading...
