To Next PageTo Next Page
Need help?Do you have a question about the Hitachi RAK-35RPC and is the answer not in the manual?
General| Type | Split System |
|---|---|
| Cooling Capacity | 3.5 kW |
| Heating Capacity | 4.0 kW |
| Energy Efficiency Ratio (EER) | 3.21 |
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R32 |
| Coefficient of Performance (COP) | 3.61 |
| Indoor Unit Weight | 9 kg |
| Outdoor Unit Weight | 26 kg |
| Noise Level (Outdoor) | 50 dB(A) |
| Air Flow (Indoor) | 580 m³/h |
Guidance on safe installation practices for the air conditioner unit.
Guidelines for safe and proper operation of the air conditioner.
Details on the components and features of the indoor air conditioner unit.
Specifications and physical dimensions of the air conditioner models.
Procedures for installing remote controller batteries and mounting the holder.
Instructions for setting the current date and time on the remote controller.
Explains the START/STOP, TEMPERATURE, and FAN SPEED buttons for unit control.
Details on special modes and timer functions for enhanced operation.
How the unit automatically selects operation mode based on room temperature.
Instructions for operating the air conditioner in heating mode.
Instructions for operating the unit in dehumidifying mode.
Instructions for operating the unit in cooling mode.
Instructions for using the unit as a fan for air circulation.
How to activate the maximum power operation for quick cooling or heating.
How to set the unit for ultra-quiet operation with reduced fan speed.
How to activate energy-saving mode by adjusting temperature and power.
Operation mode to maintain a minimum temperature when the room is unoccupied.
Setting single-use timers for turning the unit on or off at specific times.
Timer function that adjusts temperature and fan speed for energy saving during sleep.
Setting programs for automatic operation on a weekly basis.
How to fix the operation mode to prevent accidental changes.
How to check room temperature and monthly power consumption.
Procedures for cleaning the air filter to maintain performance.
Periodic checks to ensure the unit's safety and proper functioning.
