EasyManua.ls Logo

Hitachi RAS-070HNBRMQ2 - Transportation; Factory-Supplied Accessories

Hitachi RAS-070HNBRMQ2
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2.5 Transportation
Transport the product as near to the
installation location before unwrapping the package.
Do not put any material or stand on the product.
Apply two lifting wires onto the outdoor unit,
when lifting it by crane.
The Method of Hanging
When hanging the unit, ensure a balance of
the unit, ensure it safety and lift up smoothly.
(a)
Do not unwrap the package unles
s the
hanging work is finished.
(b)The hanging work can be conducted
according to the figure below.
NOTE:
Make sure the unit is in horizontal while lifting.
Do not hook with the plastic bands.
If the unit is lifted after unwrapping the package,
protect the unit with the corner paddings
or
cloth.
Do not place or leave any other objects (cables,
tools) inside the outdoor unit or control board and
verify that nothing remains there prior to installation
and test run. Ignoring the instructions can lead to
damage and fire incidents.
2.6 Factory supplied Accessories
The accessories are packed with the outdoor
unit, please check that in the package.
Accessory
Quantity
1
1
Installation Manual
NOTE:
If any of these accessories are not packed with
the unit, please contact your distributor.
Accessory Pipe Pouch
9

Related product manuals