What to do if there is over-current detection at the DC fan motor of my Hitachi RAS-60YH7?
If the DC fan motor of your Hitachi Air Conditioner detects an over-current, it could be due to a locked indoor fan, a faulty indoor fan motor, or a problem with the indoor control P.W.B. You should check these components to resolve the issue.
What to do if the room thermistor or heat exchanger thermistor is faulty in my Hitachi Air Conditioner?
If your Hitachi Air Conditioner has a faulty room thermistor or heat exchanger thermistor, it's likely due to an open or short circuit in either of these components. To fix this, you should check the room thermistor and the heat exchanger thermistor.
General| Category | Air Conditioner |
|---|---|
| Cooling Capacity | 6.0 kW |
| Refrigerant | R410A |
| Power Supply | 220-240V, 50Hz |
| Outdoor Unit Dimensions (HxWxD) | 320 mm |
Covers precautions during unit installation to prevent faults and hazards.
Outlines safety measures for moving or maintaining the unit.
Details critical safety instructions to follow during unit operation.
Identifies and explains the functions of each button on the remote controller.
Explains how the unit restarts automatically after power interruptions.
Describes how the unit selects operation mode based on room temperature.
Guides through setting up heating and explains the defrosting process.
Details how to set and use the dehumidifying function.
Explains the behavior of the dehumidifying mode under different conditions.
Provides instructions for setting and operating the cooling mode.
Explains how to use the unit as a fan or air circulator.
To Next Page
