EasyManua.ls Logo

Hitachi RAS-S10CC - AIR FLOW LOUVERS ADJUSTMENTS; Vertical Louver Adjustment; Horizontal Louver Adjustment

Hitachi RAS-S10CC
22 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
– 13 –
ENGLISH
AIR FLOW LOUVERS ADJUSTMENTS
1
2
Adjustment of the conditioned air to the left and right.
Hold the second vertical air de ector of each set of vertical
air de ectors from right as shown in the  gure and adjust the
conditioned air to the left and right.
If the “ (AUTO SWING)” button is pressed once,
the horizontal air de ector swings up and down. If the
button is pressed again, the de ector stops in its current
position. Several seconds (about 6 seconds) may be
required before the de ector starts to move.
Use the horizontal air de ector within the adjusting range
shown on the right.
When the operation is stopped, the horizontal air de ector
moves and stops at the position where the air outlet
closes.
!
CAUTION
In “Cooling” operation, do not keep the horizontal air
de ector swinging for a long time. Some dew may form
on the horizontal air de ector and dew may drop.
Adjustment of the conditioned air in the upward and downward
directions.
The horizontal air de ector is automatically set to the proper
angle suitable for each operation. The de ector can be swung
up and down continuously and also set to the desired angle
using the “ (AUTO SWING)” button.
(EN1) RAS-S10CC-5115CC 13 2/26/13 4:20 PM

Other manuals for Hitachi RAS-S10CC

Related product manuals