DEHUMIDIFYING OPERATION
Use the device for dehumidifying when the room temperature is over 16 C.
When it is under 15 C, the dehumidifying function will not work.
Press the (START/STOP) button.
START
STOP
Press the FUNCTION selector so that the display indicates
(DEHUMIDIFY).
The FAN SPEED is set at LOW automatically.
The FAN SPEED button does not work.
1
When you want to change the operation mode, please use the
FUNCTION selector.
Set the desired temperature is available.
You also can use the FUNCTION selector to select this operation.
Dehumidifying Function
Dehumidifying takes place with a target temperature which is slightly lower than the room
temperature setting. (However, target temperature is 16 C for a temperature setting of 16 C.)
If the room temperature becomes lower than the target value, operation stops. If the room
temperature becomes higher than the target value, operation restarts.
The preset room temperature may not be reached depending on the number of people present in
the room conditions.
To Next Page
Loading...
