Need help?Do you have a question about the Hitachi V-222 and is the answer not in the manual?
Details about the Cathode Ray Tube, including type, screen size, and acceleration potential.
Covers bandwidth, rise time, deflection factor, accuracy, and input impedance for vertical channels.
Details time base range, accuracy, and magnifier specifications for horizontal sweep.
Describes trigger modes, sources, slope, polarity, sensitivity, and coupling options.
Describes the function and control of the vertical preamplifiers for input signals.
Details the final amplification stage for vertical signals before they reach the CRT.
Describes the trigger preamp's role in amplifying trigger signals for synchronization.
Explains how trigger pulses are generated to start sweep operations.
Details the function of the sweep generator in producing sawtooth voltages for horizontal deflection.
Covers the horizontal amplifier's role in signal output to CRT deflection plates.
Describes the high-voltage and control circuits necessary for CRT operation.
Lists components for the CH1 input amplifier and second attenuator stage.
Lists components for the CH2 input amplifier and second attenuator stage.
Lists components for the trigger generator circuit.
Details about the Cathode Ray Tube, including type, screen size, and acceleration potential.
Covers bandwidth, rise time, deflection factor, accuracy, and input impedance for vertical channels.
Details time base range, accuracy, and magnifier specifications for horizontal sweep.
Describes trigger modes, sources, slope, polarity, sensitivity, and coupling options.
Describes the function and control of the vertical preamplifiers for input signals.
Details the final amplification stage for vertical signals before they reach the CRT.
Describes the trigger preamp's role in amplifying trigger signals for synchronization.
Explains how trigger pulses are generated to start sweep operations.
Details the function of the sweep generator in producing sawtooth voltages for horizontal deflection.
Covers the horizontal amplifier's role in signal output to CRT deflection plates.
Describes the high-voltage and control circuits necessary for CRT operation.
Lists components for the CH1 input amplifier and second attenuator stage.
Lists components for the CH2 input amplifier and second attenuator stage.
Lists components for the trigger generator circuit.
General| Bandwidth | 20 MHz |
|---|---|
| Number of Channels | 2 |
| Vertical Sensitivity | 5 mV/div to 5 V/div |
| Trigger Source | CH1, CH2, Line, EXT |
| CRT Size | 6 inches |
| Max Input Voltage | 400 V (DC + AC peak) |
| Display | CRT |
| Time Base | 0.2 μs/div to 0.5 s/div |
| Input Impedance | 1 MΩ || 25 pF |
| Trigger Modes | Auto, Normal, TV |
| Power | 100, 120, 220, 240 VAC, 50/60 Hz |
To Next Page
