8. Messages
572
8.8 KAPL08001 to KAPL09000
KAPL08019-E
The path (aa...aa) detected an error (bb...bb). (cc...cc)
Details
An error occurred in the path. The error is most likely due to a disconnected cable.
aa...aa: Path identifier (hexadecimal number)
bb...bb: Error code (hexadecimal number)
• When a path error is detected by a path health checking or the online
operation
Displays 0x000F0000 (Fixed).
• When a path error is detected through an I/O error
Displays the OS error code.
cc...cc: 0x00000000 (fixed)
Action
Check the path in which the error was detected.
KAPL08022-E
A path error occurred. ErrorCode = aa...aa, PathID = bb...bb,
PathName = cc...cc.dd...dd.ee...ee.ff...ff, DNum = gg...gg, HDevName = hh...hh
Details
A physical or logical error occurred in the path.
aa...aa: OS error code (hexadecimal number)
• When a path error is detected by a path health checking or the online
operation
Displays 0x000F0000 (Fixed).
• When a path error is detected through an I/O error
Displays the OS error code.
bb...bb: Path ID (same as PathID of
view -path) (decimal (base-10) number)
cc...cc: Host port number (same as PathName of
view -path) (hexadecimal
number)
dd...dd: Bus number (same as PathName of
view -path) (hexadecimal number)
To Next Page
Loading...