To Next PageTo Next PageWhat to do if my Hitachi YUTAMPO TAW-190RHC unit is not operating?
First, check if there has been a power outage, a blown fuse, or a tripped breaker. If the power supply is fine, verify if the timer has been set and whether it is correctly configured.
How to fix the timer that cannot be set on my Hitachi YUTAMPO TAW-190RHC?
Check whether the unit has been set to off-peak power supply. The timer will not work when the unit is set to off-peak power supply.
Why is water coming out of the outdoor unit of my Hitachi Air Conditioner?
The outdoor unit discharges water during defrosting. In cold areas, this water could freeze, so ensure the water outlet on the outdoor unit is not blocked. If the outdoor unit is installed overhead, use a bush to connect a drain pipe to the water outlet for proper discharge.
Why is steam coming out of the outdoor unit of my Hitachi YUTAMPO TAW-190RHC Air Conditioner?
This is steam generated by frost melting during defrosting in the outdoor unit, which is normal.
General| Brand | Hitachi |
|---|---|
| Model | YUTAMPO TAW-190RHC |
| Category | Air Conditioner |
| Language | English |
Explains symbols indicating hazards and important information within the manual.
Covers general safety, symbols, and important notices for safe operation and installation.
Critical information regarding product usage, installation, and compliance.
Details the components and dimensions of the tank unit.
Specifies the required clearance around the unit for servicing and ventilation.
Covers general guidelines, supplied components, and important considerations for installation.
Details requirements for choosing a suitable installation site, considering environmental and structural factors.
Details on connecting Domestic Hot Water pipes, including safety valves.
Instructions for connecting refrigerant pipes, including torque specifications.
Overview of the electrical control box and its components.
Details wiring diagrams, sizes, and protection device requirements.
Step-by-step guide for connecting power supply and transmission wires.
Instructions for adjusting the unit's mounting feet to ensure proper alignment.
Checks to perform before operating the system, ensuring correct installation and connections.
Steps to follow after installation to set up and start the system.
Guidelines for routine inspection and cleaning of the unit and its components.
Details annual checks for operation, connections, mounting frame, and outdoor unit.
Lists common operational problems and their corresponding checks and solutions.
Explains controller switches, icons, main screen, user menus, and installer mode.
Details how to set simple and schedule timers for heating operations.
