MAINTENANCE
7-15
Brand Names of Recommended Oil
Application Swing and Travel Reduction Gear Pump Transmission
Kind of Oil
Gear oil Engine Oil
Air Temp.
Manufacturer
–20 to 40 °C (–4 to 104 °F)
–20 to 40 °C
(–4 to 104 °F)
–10 to 35 °C
(14 to 95 °F)
25 to 40 °C
(77 to 104 °F)
British Petroleum BP Gear oil SAE80W-90
BP Vanellus C3
30 40
Caltex Oil Thuban SAE 90
RPM DELO 300 Oil
30 40
Esso Esso Gear Oil GP80W-90
Essolube D-3
30 40
Idemitsu Kosan Apollo Gear HE90
Apolloil super wide
15W-40
Apolloil diesel motive
S-330 S-340
Mobil Oil Mobilube GX80W-90
Mobil Delvac
1330 1340
Nippon Oil Gear Lube SP90
✸
2
Hidiesel S3
15W-40
✸
1
–20 to 35 °C
(–4 to 95 °F)
10W-30
Shell Oil Shell Spirax EP90
Rymla D
30 40
Remarks API GL 4 Class API CD Class
NOTE: The machine shipped from the factory is filled with oil marked .
✸
1
Engine oil for pump transmission
✸
2
Gear oil for swing and travel reduction device.
Brand Names of Recommended Hydraulic Oil
Kind of Lubricant Hydraulic Oil
Where to be applied Hydraulic System
Change Interval
5000 hours 2500 hours
1500 hours
Environmental
Temp.
Manufacturer
–20 to 40 °C
(–4 to 104 °F)
–10 to 40 °C
(14 to 104 °F)
–20 to 40 °C
(–4 to 104 °F)
–10 to 40 °C
(14 to 104 °F)
–20 to 40 °C
(–4 to 104 °F)
–10 to 40 °C
(14 to 104 °F)
Hitachi
Super EX 46HN
Idemitsu Kosan Super Hydro 46 WRHU
British Petroleum Bartran HV46
Caltex Oil
Rando Oil
HD46
Texaco INC.
Rando Oil
HD46
Chevron U.S.A INC. Chevron AW46
Esso NUTO H46
Mobil Oil DTE 25
Shell Oil Tellus Oil S46 Tellus Oil 46
Remarks Anti-wear type hydraulic oil
NOTE: Use proper hydraulic oil in accordance with the atmospheric temperature.
The machine shipped from the factory is filled with oil marked .
When the atmospheric temperature is between -40 °C and +20 °C: Use the proper hydraulic oil having high and low
temperature characteristics by referring to the values shown below.
Low Temperature Viscosity: Less than 4000 cSt at -40 °C
High Temperature Viscosity: More than 6.5 cSt at +80 °C
The above values are approximately equivalent to ISO viscosity grade #22. However, low temperature viscosity will
differ depending on each product. Contact each hydraulic oil manufacture directly.
When the atmospheric temperature is below -40 °C: Contact your authorized dealer.
To Next Page
Loading...
Need help?
General
