87
Crown Pad Installation
1. Install the front section first by aligning the plastic shell base and the crown pad plastic sleeve, ensuring that the center
and side holes are properly aligned. Press the crown pad plastic sleeve (center portion) into the center of the channel
which is built into the plastic shell base, working your way outward to each side.
2. Align and snap the two rear snaps into place.
Chin Curtain Removal
1. Grasp the chin curtain fabric (one side at a time) at the bottom corners and
gently pull the sleeve down and away from the shell.
Chin Curtain Installation
1. Center the front plastic sleeve of the chin curtain with the shell.
Force the chin curtain’s plastic sleeve in between the shell and EPS.
Replacement Parts
Do Not Modify Your Helmet
Your HJC helmet is designed to meet DOT standard. Contact HJC America for more information about the DOT
standard.
Modifying your helmet may increase your risk of serious injury or death in an accident. Do not modify your HJC
helmet.
Modifications include the following :
• drilling holes;
• cutting shell, liner, or strap;
• modifying the retention system, including adding a chin cup;
• removing parts;
• painting; and
• attaching accessories that are not manufactured by HJC for this helmet.
If you have questions about modifications, please contact HJC, See back cover for contact information.
Always check to make sure helmet pads are installed before using the helmet. A helmet with missing or improperly installed
pads may increase your risk of serious injury or death in an accident.
Even if your helmet has not been damaged, it needs to be replaced every 3 to 5 years depending on how much you use it.
Over time, UV rays and adhesive and component aging will damage your helmet. Wearing a damaged helmet may increase
your risk of serious injury or death in an accident.
If you are unsure if you need to replace your helmet, contact HJC America
before using your helmet again.
HJC hereby extends a limited warranty to the purchaser of a HJC helmet that the helmet is free of defects in materials and
workmanship.
This warranty is applicable to manufacturer’s defects only and is good up to one year from the date of purchase, It does not
apply to any problems arising out of wearer’s misuse, negligence, modifications, accidents, etc.
Helmet Disposal
Coverage
Any warranty of merchantability and any implied warranty are hereby expressly disclaimed. In addition HJC shall not be liable
for any consequential damages.
Disclaimer
In order to receive warranty, please take your helmet, your receipt showing the date of purchase, and a brief memo that
includes a description of the problem, your name, and phone number tothe authorized HJC dealer from which you purchased
your helmet.
Procedure
An improperly stored helmet san become damaged and may increase your risk of serious injury or death in
an accident. You should:
•
Store helmet in a cool and dry place,
•
Keep helmet away from pets and other animals,
•
Keep helmet away from heat in excess of 122°F and do not set on or near hot surfaces.
•
When helmets left out in the sun for extended periods of time, it may fade overtime.
Although your HJC helmet is constructed with the best materials available to offer a long-lasting product, it
will eventually need to be replaced. Immediately replace your helmet if:
• It has suffered an impact. Your helmet is only designed for ONE impact. An impact may fracture the outer
s
hell or compress the impact absorbing liner. You may not be able to detect this damage. Any impact in
a crash or a drop from as low as 4 feet is enough to damage your helmet.
•
T
he shell, lining, or retention system is damaged. The helmet shell, the impact absorbing lining, and
the
retention system must be in good condition to provide you with the most protection.
If you buy a new helmet, destroy the old one to ensure it cannot be reused. Do not sell or give away your
old helmet, even if it has not been damaged. Over time the protective foam in the helmet will adjust to the
contours of your head. If someone else uses this helmet it will not provide them with as much protection.
Helmet Replacement
Storing Your Helmet Correctly
Warranty
To Previous Page
Loading...
Need help?
General
