HJC RPHA 70 - Helmet Interior Pad Installation and Removal; Cheek Pad Installation; Crown Pad Installation; Crown Pad Removal

-. Make a gab with peak.
[ Step 3 ] Insert wire-ball into the holder-SV
[ Step 4 ] Assemble the sun-visor
-. To check the wire-ball is in right position, move SV lever backward and forward more than 5 times.
-. If it works well, assemble the sun-visor.
[ Step 5 ] Re-check the mechanism works well, after assembling the sun-visor.
-. Put the wire-ball using flat driver between the gap.
Peak
Flat driver
Quality Team
Peak
Wire-ball
■ RPHA 70 Mechanism repair