Need help?Do you have a question about the HJC SMART 11B and is the answer not in the manual?
General| Brand | HJC |
|---|---|
| Model | SMART 11B |
| Category | Conference System |
| Language | English |
Download the SMART HJC BT App from Google Play Store or App Store for device configuration.
Download SMART HJC Device Manager for firmware upgrades and device configuration settings.
Details the Bluetooth module, including charging port, reset button, and microphone connector.
Explains the button module, featuring status LED, TAP, (+) and (-) buttons.
Shows installation compatibility with modular and open face helmets.
Provides instructions for removing the helmet module cover during installation.
Instructions for removing the helmet's cheek pads for installation.
Steps for installing the button module onto the helmet.
Guide on installing the Bluetooth module into the helmet.
Instructions for installing the microphone on modular or open face helmets.
Steps for installing the microphone on full face helmets.
Guide on installing the speaker modules into the helmet.
Instructions for arranging wires neatly during installation.
Guide on fastening the cheek pads back after installation.
Illustrates closing the chin bar or visor after installation.
Explains icons for tapping and holding buttons for specific actions.
Describes the icon representing an audible prompt like 'Hello'.
Instructions for powering the headset on and off using the button.
Guide on adjusting volume up or down using the buttons.
Details how the battery level is indicated after powering on.
Steps to enter the configuration menu and phone pairing mode.
How to select 'SMART HJC 11B' from detected Bluetooth devices.
The headset enters pairing mode automatically on initial power-on.
Instructions for answering, ending, and rejecting incoming phone calls.
Steps to activate voice dial from the headset.
Instructions for playing and pausing music tracks.
Guide on skipping to the next or previous music track.
Explains that up to three people can be paired for intercom conversations.
Steps for pairing via QR code scanning using the SMART HJC BT App.
Notes that SIP is not compatible with Bluetooth 3.0 or below headsets.
Steps to save paired friends and scan for more intercom contacts.
Each user presses and holds the TAP button for 5 seconds to initiate pairing.
Tap the TAP Button to confirm intercoms are paired.
Repeat steps to pair with other headsets.
Shows the order in which intercom friends are connected.
Explains that the last paired headset becomes the First Intercom Friend.
Instructions to start/end conversation with the First Intercom Friend (D).
Instructions to start/end conversation with the Second Intercom Friend (C).
Instructions to start/end conversation with the Third Intercom Friend (B).
Steps to access the configuration menu by holding the button.
How to navigate between menu options using button taps.
Steps to execute a selected menu option by tapping the button.
Instructions for performing a fault reset using the pinhole button.
Steps to perform a factory reset to restore default settings.
Quick reference for powering on/off and adjusting volume.
Quick reference for answering, ending, rejecting calls, and voice dial.
Quick reference for intercom pairing and starting/ending conversations.
Quick reference for playing/pausing and navigating music tracks.
To Next Page