4 PAIRING THE HEADSET WITH OTHER BLUETOOTH DEVICES
SMART HJC 21B 2
nd
Gen Standard Motorcycle Bluetooth
®
Communication System for HJC Helmets
| 21
2. Select SMART HJC 21B in the list of
Bluetooth devices detected. If your
mobile phone asks for a PIN, enter
0000.
Device B
Pi
Bluetooth
Note:
• The phone pairing mode lasts for 3 minutes.
• To cancel phone pairing, tap the TAP Button.
4.1.2 Pairing When the SMART HJC 21B is Turned Off
1. While the headset is off, press and hold the TAP Button and the (+)
Button until the LED flashes red and blue alternately and you hear a
voice prompt, “Phone pairing”.
=
HOLD
Blinking
“ Phone pairing”
2. Select SMART HJC 21B in the list of
Bluetooth devices detected. If your
mobile phone asks for a PIN, enter
0000.
Device B
Pi
Bluetooth