HK Audio AC 22 LINEAR PRO CONTROLLER - Front Panel Controls and Indicators; Peak Limit Low LEDs; Biamp LED; Mains LED

LEFT RIGHT
HIGH/
FULLRANGE
LANCED
UTPUTS
LEFT RIGHT
BALANCED
INPUTS
ING SYSTEM
LEFT
RIGHT
LEFT
MAINS
RIGHT
BIAMP
HIGH LOW
MONO
BASS
MODE
PEAK LIMIT
ROLLER
MODUL RETRAINER SCREW 2
These screws are used to mount the
module to the Controller´s chassis.
INPUT JACKS LEFT/ RIGHT
Electronically balanced inputs. Connect
these jacks to your mixer desk´s outputs.
HIGH/ FULLRANGE OUTPUT LEFT/ RIGHT
Electronically balanced outputs. Stereo high end signals are send
through these jacks in the BIAMP mode. In the FULLRANGE
mode, the entire stereo signal is send through these jacks.
Connect these jacks to your high end power amps´s inputs
PEAK LIMIT HIGH LEDs
Illuminate when the stereo
limiter for the HIGH/
FULLRANGE signal works.
MONO BASS LED
Illuminate when the MONO/
STEREO BASS button on the
rear panel is pressed.
PEAK LIMIT LOW LEDs
Illuminate when the stereo
limiter for the LOW frequency
signal (BASS) works.
BIAMP LED
Illuminate when the BIAMP/
FULLRANGE button on the
rear panel is pressed.
MAINS LED
Illuminate when the
device is connected
to AC power supply.