Elements 1.0
9
8 Mains Input
Connect this connector socket using a low-power connection cable
(included with delivery) with the mains socket.
Note: The active elements include a lockable V-Lock mains input
socket. Combined with a lockable connection cable ( [Volex] or
structurally identical, optional available) the power cable can be cut
off thus preventing any risk of inadvertent reactivation.
9 Power switch
When switching on, the signal LED lights up for around 5 seconds in red
and then switches to green to indicate it is ready for operation. The fan
is temperature-controlled and runs throughout the system check.
10 Auto Stand-by (only E 110 Sub AS)
The E 110 Sub AS also includes an auto standby function, which is
switched on and off via an auto standby switch. When switched to [ON],
the output stage will automatically revert to sleep mode if no signal is
connected for 180 minutes. From a level of -68dB (1 kHz), the E 110
Sub AS resumes operation. Auto standby to [OFF] deactivates this
function and the subwoofer remains permanently ON.
4 Accessories
EF 45
Foot (PHOTO)
The foot acts as the base for the top speakers, the amp module or
the spacer stem. The extendable base extensions ensure the attached
elements remain safely and securely in place.
• Stable foot with minimal footprint • built-in E-connect-signal
connection
• 2 x parallel NL4 connection
• 45-51 x 31 x 12.5 cm; 7.7 kg
EP 1/EP 2
Spacer stem (PHOTOS)
In confined spaces, these devices facilitate easy and swift installation.
They are infinitely variable and via E-connect, provide cable-free signal
feed for the attached top speakers.
• Anodized aluminum with large mounting screw
• EP 1 height-adjustable from 95-160 cm EP 2 from 44-60.5 cm
• Built-in E-connect-signal connection
Weight EP 1: 0.8 kg; EP 2: 0.5 kg
E 435 Install Kits
The ELEMENTS install kit comprises modified E 435-mid/high elements
and special EA 600 including mounting brackets. Up to six mid/high
elements (inc. wall-mount-Kit) can be combined.
The elements can be positioned horizontally through 180 degrees on the
mounting brackets and be fixed swiftly and hassle-free using the two
socket head screws provided.
The cabling is invisible via a loudspeaker cable with mono jack plugs,
which are fed through the install kit.
Assembly instructions are included in the install kit and can also be
downloaded from www-hkaudio.com.
Soft Bag (FOTO)
The padded case can accommodate four E 435 or two E 835 mid/high
elements or four EA 600 amp elements. In addition, a spacer stem can
also be fitted.
Subwoofer Cover (FOTO)
Subwoofers are frequently not moved around with kid gloves. With this
in mind, this cover was double-cushioned to effectively protect active
and passive subs against damage in transit.
Base Bag (FOTO)
The perfect bag for the EF 45 foot –, which you can carry over your
shoulder.
• English • Deutsch • Français • Italiano • Español
To Next Page
Loading...
Need help?
General
Weight and Dimensions
