Install Kit E 435/E 435 A 1.0
7
5 Configurations
EA 600 IL
EA 600 IL
EA 600 IL
EA 600 IL
Install Kit E435
plus max. 4x E 435 optional
(or 2x E 835)
Install Kit E435 A
plus max. 3x E 435 optional
(or 1x E 435 plus 1x E 835)
Configuration Overall height
Install Kit E 435/E 435 A 848 mm
*) HEADS UP: If you use one E
835 instead of two E 435 units,
the overall height will decrease
20 mm for each E 835 in the
array (see page 3 for more
on this)
Installkit + 1x E 435 1230 mm
Installkit + 2x E 435 1612 mm*
Installkit + 3x E 435 1994 mm*
Installkit + 4x E 435** 2376 mm*
**) Only possible with the Install Kit for passive units
6 Technical Data
4 Alignment
E 435 IL U/O Mid/High Unit
Nominal power handling: 150 W RMS
Frequency response -10 dB: 140 Hz – 20 kHz
Axial sensitivity 1W@1m: 97 dB half-space
Nominal impedance: 16 ohms
Connections: 1 E-Connect in, 1 E-Connect out
Woofers: Four 3.5“ wideband speakers
Directivity: 70° horizontal
X-over frequency: 140 Hz, 12 dB/ oct. passive
Weight: 2.35 kg / 5.2 lbs
EA 600 IL Power Amp
Continuous power output, EIA: 600 watts Class D @ 4 ohms
Input sensitivity: +4 dBu/ -10 dBu (switchable)
Active protective circuit: RMS Limiter
Protection: DC, Load, Thermal
Filter: Subsonic filter, 4 system filters
Cooling: Temperature-controlled fan
Connections: Combination XLR/ 1/4” In, XLR Out, Speakon Parallel Out, E-Connect Out
Weight: 2.75 kg / 6.1 lbs
EA 600 ILEA 600 IL
EA 600 IL
• Español• English • Deutsch • Français • Italiano
To Next Page
Loading...
