Hkoenig fry800 - Troubleshooting

Troubleshooting:
Problem
Possible Cause
Solution
Does not work
l Power cord has not been
inserted into the power
socket
l Closely insert the power cord into the
grounded power socket.
l Did not set the cook
model
l Click the model selection button to
select appreciate cook model, then click
the ON/OFF button
l Didn’t click the ON/OFF
button after select cook
model.
l Click the ON/OFF button
Food is rare
when time out
l Too much food in the
basket
l Fry food in turns
l Temperature set is too
low
l Set to an appropriate temperature, re-
fry food.
l Cooking time is short
l Set an appropriate cooking time, re-fry
food.
Did not fry food
evenly
l Certain foods need to be
shaken in the middle of
cooking.
l In the middle of cooking process, pull
the pot out and shake it to separate the
overlapped food material, then push the
pot back to continue.
Fried food is not
crisp
l Some food materials
have to be fried with oil
l Plush a thin layer of oil on the surface of
the food first, then start to fry them.
Can not smoothly
push the pot
back to appliance
l The pot with too many
food materials is too heavy
l The food material in the basket can not
exceed the max. line.
l The basket is not
correctly placed in the pot.
l Press the basket into the pot.
l Handle bar stuck
l Place the handle bar in horizontal
position.
Smoking
l Frying oily food
l Normal phenomenon.
l Fryer contain oil from last
use
l Please clean the pot and basket after
use.