6) Press power switch to turn it on.
7) Cleaning
Hold the handle with the nozzle pointing down, and press the jet handle several times.
When you are spraying water, the handle is tilted. The handle should be slightly lower at the front
and slightly higher at the tail, otherwise the water may not be smooth.
When spraying water, the nozzle at the front should aim at stain or dirt.
Hold the suction handle tightly while spraying clean water while absorbing water.
Press the suction inlet on the sewage and pull the handle slowly forward.
Water trickles down when you release the spray handle.
Do not spray water continuously in the same place, the water is quickly absorbed after spraying,
if the moisture remains in the depth of the texture, it may lead to mildew.
Please fix the suction handle and hose on their respective racks.
To Next Page
Loading...