Please make sure the lids of cleaning tanks are closed.
Do not put water except tap water or alkaline ionized water into the water tank, otherwise it may
lead to failure. Do not use water more than 40°C.
Clear out the water from tanks after using the product. Storing water can cause leaks or mold.
2) Connection of the vacuum hose
The hose is inserted into the interface of the host.
3) Connection of the handle
The brush part (handle) is hanged to the host machine.
4) Open the clean water tank lid and pour in tap water
5) Plug in
Before inserting the power plug into the socket, make sure that the power switch is turned off
To Next Page
Loading...