Warming water (always below 40 degrees) is even more effective.
To avoid detergent residue, please absorb carefully.
When the foam in the dust bin exceeds the full waterline, please stop the operation, and clean it
up. Otherwise, water droplets may be immersed into the main engine.
9) Press the power switch to turn off the device.
10) Unplug the device.
Before removing the power plug, ensure that the power switch is turned off.
When removing the power plug, do not hold the round cord of the power cord.
Be sure to remove the plug first.
After use, do not plug into the power supply, be sure to pull out the plug.
11) Remove and clear out the dust tank, and clean the water tank. Remove the vacuum hose
and handle for storage.
To Next Page
Loading...