HMF 250437 - Fireproof Document Safe; Product Features and Protection; Storage and Usage Warnings; Operation: Unlocking and Setting Code

INSTRUCTION MANUAL
ART.-NO.: 250437
EN : FIREPROOF DOCUMENT SAFE
The re and waterproof document cassette is designed to protect paper documents and other valuable documents against
re and water damage. Fire protection: UL certied, 30 minutes re resistance at temperatures up to 843°C. Interior
temperature in case of re: below 177°C. Waterproof: Tests conrm that the interior of the document cassette remains dry for
8 hours even when completely immersed in water.
CAUTION! This safe is NOT intended for the storage of magnetic data carriers, such as data cassettes, audio/video cassettes,
diskettes, lms, photos or photo negatives. This safe is NOT intended for the storage of medication, items containing
ammable weapons or other weapon systems.
STORAGE
To ensure re and water protection at all times store at with
the lid facing upwards, so that the dead weight of the lid
closes the seal.
RIGHT
Never store in
an upright position!
WRONG
CAUTION!
Due to the airtight seal, it is necessary to ventilate the document cassette at regular intervals for at least 30 minutes and to
equip it with fresh silica gel bags in order to avoid accumulation of moisture in the interior.
UNLOCK AND OPEN
Turn each knob to the set code (when opening for the rst time: 1 5 9). To unlock, press the knob and lift the lid to open the
document cassette.
SET NEW CODE
Turn each knob to the originally set code. Take the reset tool out of the holder in the safe. Press the tool into the two notches
between the cogs. Turn the cogs to the new code. Release the code reset tool and place it back in the holder in the safe. The
new code is now set.
Before using the code reset tool, the wheels must be turned to the correct code position.
Caution! Test the new code before closing the door of the safe! Once your personal code has been set, the safe can no longer
be opened with the preset standard code.
CLOSING AND LOCKING
Close the cover and press it down until it locks into place. Turn the wheels so that they no longer correspond to the set code.
The document box is now locked.
© Holthoff Trading GmbH
HMF.DE | service@hmf.DE
Cover
Holder for reset tool
Reset tool
Document safe
Button
Turning knob
Notches for reset tool
Handle