Need help?Do you have a question about the HMS Networks Intesis 700 Series and is the answer not in the manual?
General| Brand | HMS Networks |
|---|---|
| Model | Intesis 700 Series |
| Category | Gateway |
| Language | English |
Explains the purpose and scope of this user manual for the Intesis gateway.
Provides critical safety instructions for installation, handling, and operation of the gateway.
Defines DANGER, WARNING, CAUTION, IMPORTANT, NOTE, TIP, and NOTICE symbols used in the document.
Lists available order codes, Intesis MAPS templates, and corresponding applications for the gateway.
Details the items included in the gateway package, such as the gateway itself and accessories.
Highlights the main functionalities, certifications, and capabilities of the Intesis gateway.
Explains how the gateway facilitates data exchange between DALI and BACnet/Modbus systems.
Provides technical specifications on signal capacity, DALI channels, and device limits for different protocols.
Lists and categorizes the types of DALI devices compatible with the gateway.
Instructions for physically installing the gateway, including DIN rail mounting procedures.
Identifies and illustrates all physical ports and connectors on the Intesis gateway.
Details wiring specifications for connectors and requirements for the gateway's power supply.
Step-by-step instructions for connecting DALI channels and the Ethernet port for Modbus TCP.
Guides for establishing BACnet/IP network connections and connecting a PC for configuration.
Explains the status and meaning of each LED on the gateway's front panel.
Describes the operational functions of Button A, Button B, and the combined Button A+B.
Comprehensive list of electrical, mechanical, and environmental specifications for the gateway.
Provides diagrams and measurements for the gateway's physical size and installation space requirements.
Lists BACnet objects for standard DALI ballasts, including status, levels, and control parameters.
Details BACnet objects for controlling DALI groups, such as color and dimming settings.
Covers BACnet objects for broadcast commands and emergency lighting functions.
Lists BACnet objects specific to LED DALI ballasts, including features and operating modes.
Provides BACnet objects for managing color temperature, RGB, and white levels of DALI devices.
Details BACnet objects related to energy consumption monitoring and device diagnostic information.
Lists BACnet objects for occupancy state and light average readings within specific areas.
Covers BACnet objects for various input devices like occupancy sensors and push buttons.
Details Modbus registers for standard DALI ballasts, including status, levels, and control parameters.
Lists Modbus registers for controlling DALI groups, such as color and dimming settings.
Covers Modbus registers for sending broadcast commands to DALI devices.
Details Modbus registers related to emergency lighting functions for DALI ballasts.
Lists Modbus registers specific to LED DALI ballasts, including features and operating modes.
Provides Modbus registers for managing color temperature, RGB, and white levels of DALI devices.
Details Modbus registers for energy consumption monitoring and device diagnostic information.
Lists Modbus registers for occupancy state and light average readings within specified areas.
Covers Modbus registers for various input devices like occupancy sensors and push buttons.
Step-by-step guide on how to change the gateway's communication protocol using Intesis MAPS software.
To Next Page
