Need help?Do you have a question about the HMS Ewon Flexy FLB 3205 and is the answer not in the manual?
General| Model | Ewon Flexy FLB 3205 |
|---|---|
| LAN | Ethernet |
| Digital Inputs | 4 |
| Digital Outputs | 4 |
| Analog Inputs | 2 |
| Power Supply | 12-24 VDC |
| CPU | ARM Cortex-A8 |
| USB Ports | 1 x USB 2.0 |
| Connectivity | Ethernet, Cellular |
| WAN | Cellular (3G/4G) |
| Serial Ports | 1 |
| Protocols | MQTT, Modbus, HTTP, SNMP, OPC UA |
| Operating Temperature | -20°C to +60°C |
Provides an overview of the FLB 3205-4G (NA) extension card and its relation to the Ewon Flexy family.
Details the version changes and updates made to this installation guide over time.
Lists other essential documentation for the Ewon Flexy base units and accessories.
Clarifies ownership of trademarks, including Ewon and other mentioned brands.
Defines the safety, environmental, and regulatory information covered for the FLB 3205-4G (NA) extension card.
Provides essential precautions and procedures to prevent damage from electrostatic discharge when handling the card.
Lists the safety standards the FLB 3205 extension card complies with, such as IEC/EN 60950-1 and UL 62368-1.
Outlines the FLB 3205's compliance with FCC Rules, including conditions for operation.
Details the certifications obtained by the FLB 3205 from authorized bodies, like UL and CB certificates.
Provides national identification numbers for the modem, including FCC ID and IC ID.
Describes the physical arrangement of the extension card, including connectors and key components.
Details the location and information included on the identification label of the extension card.
Explains the syntax and meaning of the part number structure for Ewon Flexy extension cards.
Details the function and meaning of the LEDs located on the front panel of the extension card.
Provides technical specifications for the LTE extension card, including frequencies, power, and antenna connector.
Specifies the operating and storage conditions, including temperature, humidity, and altitude limits.
Explains which slots on the Ewon Flexy base units are compatible with the FLB 3205 extension card.
Guides the user on how to correctly insert the SIM card into the extension card holder before installation.
Details the step-by-step process for physically inserting the FLB 3205 into the Ewon Flexy base unit.
Explains the detection order and software compatibility when inserting multiple FLB 3205 extension cards.
Discusses the power demand points of the FLB 3205 and how they relate to base unit capabilities.
Details how to connect to the Ewon device's web interface via a browser.
Explains how to view the system status and detected extension cards on the Ewon device's web page.
Guides to finding modem manufacturer, firmware, and type information in the device's web interface.
To Next Page
