Need help?Do you have a question about the HMS IXXAT Safe T100 and is the answer not in the manual?
General| Model | Safe T100 |
|---|---|
| Safety Integrity Level | SIL 3 |
| Communication Interface | Ethernet |
| Operating Voltage | 24 V DC |
| Storage Temperature | -40°C to +85°C |
| Protection Class | IP20 |
| Weight | Approx. 200 g |
| Product Type | Control Unit |
| Communication | PROFIsafe |
Provides information for correct usage, integration, and safety applications of the T100.
Describes the T100 as a pre-certified module for integrating safe I/O signals into automation devices.
Covers the T100's safe operation principles, including SIL-3/Cat.4 architecture and proof-test interval.
Describes the conformant digital inputs, reference levels, and configuration options like DI-C and DI-S.
Describes the two digital outputs, their SIL/PL ratings in dual-channel mode, and current limits.
Explains T100 self-tests, global fail-safe state, error message setup, and actions upon detected failures.
Details how T100 safety inputs can be configured with filters and modes for user applications.
Allows combining two digital inputs into one safety input for SIL 3/PL e Cat 4 rating (dual-channel mode).
Covers configuration of safety outputs, including channel modes, enable settings, and output testing procedures.
Allows single-channel or dual-channel mode for outputs to achieve SIL 3/PL e Cat 4 ratings.
Details the PROFIsafe implementation, profile version, and configuration sequence using engineering tools.
Covers error detection, reporting, and handling for T100/PS, including global fail-safe errors in PROFIsafe.
Details CIP Safety protocol support, object model, and implementation in T100/CS.
Covers safe data exchange in EXECUTING state for T100/CS, including input/output status and access via AIC.
Covers error detection, reporting, and handling for T100/CS, including channel-specific and global fail-safe errors.
To Next Page
