Need help?Do you have a question about the HNC HV10-R75G1-2 and is the answer not in the manual?
General| Efficiency | ≥96% |
|---|---|
| Protection Features | Overcurrent, Overvoltage, Undervoltage, Overheat, Short Circuit, Phase Loss, Ground Fault |
| Cooling Method | Forced Air Cooling |
| Operating Temperature | -10°C ~ +40°C (Derating above 40°C) |
| Storage Temperature | -20°C ~ +60°C |
| Humidity | 5% ~ 95% RH, Non-condensing |
| Dimensions | 280mm x 400mm x 250mm |
| Weight | 18kg |
Details on rated voltage, frequency, allowable voltage variation, and overload capacity.
Covers control modes, frequency settings, V/F curves, PID, RS485, and signal outputs.
Includes DC brake, noise, operating status, display, alarms, environmental conditions, and cooling.
Critical safety guidelines for installation, including power, grounding, and terminal handling.
Visual representation of the inverter's physical dimensions and keypad base.
Details on basic wiring, terminal functions, and essential wiring practices.
Explains Modbus RTU communication settings, frame structure, and data representation.
Defines register addresses and function codes for reading and writing parameters.
Details parameter addresses, data meaning, and R/W attributes for communication.
Lists common abnormal phenomena and their corresponding possible causes and countermeasures.
Introduces parameter groups (00-08) and notes on modification rules.
Details foundational parameters for motor control, frequency sources, and operation modes.
Covers parameters for starting, braking, jog operations, and multi-speed settings.
Configuration for I/O signals and PID control loops.
Settings for motor, protection, communication, and advanced functions.
Parameters for timing, counting, swing frequency, and system monitoring.
To Next Page