Need help?Do you have a question about the Hobart 84186 and is the answer not in the manual?
General| Manufacturer | Hobart |
|---|---|
| Model | 84186 |
| Category | Commercial Food Equipment |
| Material | Stainless Steel |
| Power Source | Electric |
| Motor Power | 1.5 HP |
| Frequency | 60 Hz |
| Motor | Induction |
Overview of the Model 84186 Food Cutter, its design, power, and available attachments.
Check for shipping damage, notify carrier and Hobart if damaged. Retain packing materials.
Place on a sturdy, flat surface and level using adjustable feet.
Connect to a properly grounded receptacle. Consult an electrician if needed.
Clean the machine after installation and before initial use, following specific instructions.
Ensure safety devices are correctly positioned. Keep hands away from rotating knives.
Start machine, feed product gradually. Bowl cover mixes contents. Use spatula for mixing/unloading.
Instructions for installing and using various attachments with the food cutter.
Daily wiping and washing of bowl, knives, and attachments after each use.
Motor bearings are grease-packed. Check gear cases occasionally; contact Hobart Service.
Adjust knife-to-bowl clearance (0.010"-0.050") using specific tools and procedures.
Sharpen knives by removing the unit from the shaft and using an oil stone.
To Next Page