SUBJECT CHAPTER/SECTION PAGE
D. Engine 2-1 3
(1) Lubrication schedule 2-1 3
(2) Oil specification 2-1 3
(3) Oil viscosity 2-1 3
(4) Changing engine oil 2-1 4
(5) Changing engine oil filter 2-1 4
E. Starter 2-1 4
5. Air Cleaner Service 2-1 5
A. Cartridge Removal 2-1 5
B. Cartridge Installation 2-1 5
6. Engine Fuel 2-1 6
A. Quality 2-1 6
B. Fuel Filter 2-1 6
7. Engine Cooling System 2-1 6
A. General 2-1 6
B. Radiator Cap 2-1 6
(1) General 2-1 6
(2) Removal 2-1 6
(3) Installation 2-1 7
C. Warm Weather Operation 2-1 7
D. Cold Weather Operation 2-1 7
(1) General 2-1 7
(2) Checking coolant solution 2-1 7
(3) Preparing the coolant solution 2-1 7
(4) Installing the antifreeze solution 2-1 7
E. Draining the Cooling System 2-1 8
F. Cleaning the Cooling System 2-1 8
G. Cleaning the Radiator Core 2-1 9
H. Filling the Cooling System 2-1 9
8. Generator Maintenance 2-1 9
A. Cleaning 2-1 9
B. Adjustment 2-1 10
9. Drive Belts 2-1 10
A. Checking Belt Tension 2-1 10
B. Belt Adjustment 2-1 10
10. Trailer, Truck and Battery Maintenance 2-1 10
11. Service Helps 2-1 10
A. Wiring 2-1 10
B.Control Box Trays 2-1 10
C. Generator Exciter 2-1 11
D. Engine Control Panel 2-1 12
SECTION 2. INSPECTION/CHECK 2-2 1
1. General 2-2 1
2. Engine 2-2 1
A. Fuel (See Fig. 1 for time schedules) 2-2 1
B. Lubrication 2-2 1
OM-2031
Table of Contents August 5/89 Revised
Page 4
To Next Page
Loading...
Need help?
General
