Hobart ecomax - Information for Users; General Safety Information; Operating Functions; Commissioning

- 3 -
SUMMARY
THE PRESENT MANUAL IS PROPERTY OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
0. DOCUMENT IDENTIFICATION
0.1 REFERENCE STANDARDS
1 INFORMATION FOR USERS
Foreword - Purpose of document - How to read the document - Keeping the document -
Addressees - Operator training program - Preparations by the customer - Intended Use
Conditions allowed for operation - Testing and warranty - Authorisation
2. GENERAL SAFETY INFORMATION
Description of pictograms - General personal protection procedures - Warning
signs - Foreward - Obligations - Prohibitions - Advice - Recommendations
Indications concerning residual risks - What to do when there is a gas odour in the area
3 OPERATING FUNCTIONS
Mode and function of buttons - Control panel operation - Description of the
operating modes - Software language setup - Description of stop modes
4. COMMISSIONING
Commissioning - Daily activation - Daily and prolonged deactivation - Starting production -
Turning-on/Turning-off
5. OPERATING PARAMETERS
Date/Clock - Setting the temperature - Setting the time - Moisture setup - Setting the
vent (convection only) - Setting the fan speed - Setting the preheating - Setting fast cooling
Setting the programmed start (postponement)
6. COOKING PARAMETERS
Convection (Rising) - Steam - Combi - Core probe and Delta T
7 PROGRAMMING
Recipe Index (Save recipe - Modify recipe - Start recipe - Delete recipe) - USB DEVICE
8. LOADING AND UNLOADING THE PRODUCT
Loading and unloading the product
9. ROUTINE MAINTENANCE
Cleaning the appliance - Cleaning at commissioning - Automatic washing -
Manual washing - Periodic inspections
10 ALARM SIGNALS
List of alarms - Troubleshooting
DISPOSAL
Deactivating and scrapping the appliance - Waste disposal