Need help?Do you have a question about the Hobart WS Series and is the answer not in the manual?
General| Brand | Hobart |
|---|---|
| Model | WS Series |
| Category | Industrial Equipment |
| Language | English |
Steps to follow after receiving the equipment to check for shipping damage.
Guidance on selecting an appropriate location for the water press, including floor pitch.
Instructions on how to level the unit using vibration pads and adjustable feet.
Information about the optional tray flush attachment and its plumbing.
Diagrams showing different undercounter orientations and critical dimensions.
Details on connecting the water supply, including pressure requirements.
Guidance on plumbing the drain connection according to local codes.
Information on optional remote control boxes for starting and stopping the machine.
Procedure to check and correct motor rotation after installation.
Explanation of the main control panel and optional clean cycle controls.
Step-by-step guide on starting and using the pulper, including safety interlocks.
Specific techniques for feeding difficult materials like heavy printed matter or plastic bags.
Causes of foaming and potential solutions for the pulper tank.
Critical safety warning regarding power disconnection before performing cleaning procedures.
Basic maintenance for motors, keeping them clean and ventilation openings clear.
Details on the water press drive, including lubrication checks for the speed reducer.
Common causes and remedies for the machine failing to start.
Troubleshooting steps for issues related to water supply or insufficient water.
Causes and solutions when the pulper becomes jammed with material.
Troubleshooting for when the water press mechanism is jammed.
Solutions for problems related to the machine's draining function.
Remedies for excessive foaming occurring in the water press.
To Next Page