Hobbe LONDON - User Manual

IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE OR USE YOUR CHAIR.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
HEALTH & SAFETY:
DO NOT jump on this chair.
DO NOT use this chair if any parts are missing, damaged or worn.
DO NOT use this chair unless all fixings are tightly secured.
Always use on a level and even surface.
Proper assembly is crucial.
Improper assembly can result in damage to your chair or cause injuries.
Ensure an adult is always present during use of the chair.
CARE & MAINTENANCE:
Periodically check all screws & fixings to ensure they are tightly secured.
Always lift the chair with two people whenever you need to change the chair position.
Keep any sharp objects away from the chair.
To avoid possible scratching, assemble furniture on a soft surface such as carpet or a blanket.
ASSEMBLY INSTRUCTIONS
LONDON
NECESSARY TOOLS
This tool can be use on both end
This tool can be used on both ends
All manuals and user guides at all-guides.com
all-guides.com

Summary

Hobbe Assembly Instructions London

Health and Safety Guidelines

Provides essential safety advice for using the chair, including warnings against jumping, using damaged parts, and ensuring stable placement.

Care and Maintenance Advice

Details on periodically checking fixings, lifting the chair with two people, and protecting surfaces from scratches.

Necessary Tools for Assembly

Lists the tools required for assembly, highlighting a specific tool usable on both ends.

Assembly Components and Hardware

Part List Overview

Lists all components required for assembly, including the Rocker Chair, Wooden Legs, and Cross Bar.

Hardware Identification

Details the specific hardware items needed, such as bolts, washers, spring washers, and an Allen key.

Assembly Steps

Step 1: Attach Cross Bar to Latch Wood

Illustrates the process of connecting the Cross Bar to the Latch Wood using provided hardware.

Step 2: Connect Legs to Rocker Chair

Shows how to attach the Wooden Legs (B) to the Rocker Chair (A) using the Cross Bar (C).

Step 3: Secure Legs with Bolts

Details the attachment of the Wooden Legs to the chair's frame using specific bolts and washers.

Step 4: Final Chair Assembly

Illustrates the final assembly of the chair, including securing the main frame with bolts.

Step 5: Completed Chair

Shows the fully assembled Hobbe chair.

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features

This document provides assembly instructions and important information for a "Hobbe. LONDON" rocking chair.

Function Description

The Hobbe. LONDON is a rocking chair designed for comfortable seating and gentle rocking motion. It is intended for indoor use and requires assembly before use. The chair consists of a main rocker chair body, two wooden legs (rockers), and a cross bar that connects the legs. The assembly process involves attaching the cross bar to the wooden legs, then securing the wooden legs to the main chair body using various screws, washers, and an Allen key.

Important Technical Specifications

The assembly hardware includes:

• M6 x 80mm screws: 4 pieces, likely used for attaching the main chair body to the wooden legs.
• M6 x 45mm screws: 2 pieces, likely used for attaching the cross bar to the wooden legs.
• Washer M8: 4 pieces, used with the M6 x 80mm screws.
• Washer M6: 2 pieces, used with the M6 x 45mm screws.
• Spring Washer M6: 6 pieces, used in conjunction with both M6 x 80mm and M6 x 45mm screws to provide tension and prevent loosening.
• Allen Key M4: 1 piece, the primary tool for tightening the screws.
• Latch Wood: 2 pieces, small wooden components that likely help secure the cross bar to the wooden legs.

The chair components are:

• Rocker Chair: 1 piece, the main upholstered body of the chair.
• Wooden Legs: 2 pieces, these form the rocking base of the chair.
• Cross Bar: 1 piece, connects the two wooden legs to stabilize the rocking base.

The assembly steps illustrate the sequence of attaching these components. Step 1 shows the cross bar (C) being inserted into one of the wooden legs (B), secured by a "Latch Wood" piece. Step 2 shows the two wooden legs (B) being prepared for attachment, with the "Latch Wood" pieces already in place. Step 3 details the attachment of the cross bar to the wooden legs using M6 x 45mm screws, M6 washers, and M6 spring washers, tightened with the M4 Allen key. Step 4 illustrates the final attachment of the main rocker chair body (A) to the assembled wooden legs (B) using M6 x 80mm screws, M8 washers, and M6 spring washers.

Usage Features

The Hobbe. LONDON rocking chair is designed for general seating and relaxation. Its rocking mechanism provides a gentle, soothing motion.

Safety features and recommendations:

• Do NOT jump on this chair. This emphasizes that the chair is not designed to withstand high impact or excessive force, which could lead to damage or injury.
• Do NOT use this chair if any parts are missing, damaged or worn. This is a critical safety instruction, as compromised components can lead to structural failure and user injury.
• Do NOT use this chair unless all fixings are tightly secured. Loose fixings can cause instability, leading to the chair collapsing or components detaching during use.
• Always use on a level and even surface. An uneven surface can compromise the stability of the rocking chair, increasing the risk of tipping or an unstable rocking motion.
• Proper assembly is crucial. The instructions explicitly state that "Improper assembly can result in damage to your chair or cause injuries," highlighting the importance of following the provided steps accurately.
• Ensure an adult is always present during use of the chair. This suggests that the chair might be used by children or individuals who require supervision, or it could be a general safety recommendation for any user to ensure responsible use.

Maintenance Features

The manual provides clear guidelines for maintaining the chair's safety and longevity:

• Periodically check all screws & fixings to ensure they are tightly secured. Over time, screws and fixings can loosen due to regular use and movement. Regular checks and re-tightening are essential to maintain the chair's structural integrity and prevent accidents.
• Always lift the chair with two people whenever you need to change the chair position. This indicates that the chair may be heavy or cumbersome, and lifting it with two people helps prevent personal injury (e.g., back strain) and potential damage to the chair itself.
• Keep any sharp objects away from the chair. This is a general care instruction to prevent cuts, tears, or punctures to the chair's upholstery or frame.
• To avoid possible scratching, assemble furniture on a soft surface such as carpet or a blanket. This practical tip protects both the chair's components and the floor surface during the assembly process.

The provided tool, an Allen Key M4, is described as being usable on "both ends," suggesting it might have different sizes or functionalities on each end, or simply be designed for ergonomic use. This tool is crucial for the assembly and subsequent maintenance (re-tightening) of the chair's fixings.

Hobbe LONDON Specifications