EasyManua.ls Logo

Hobbico VISTA FPV User Manual

Default Icon
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
BEFORE FLYING, PLEASE
READ & UNDERSTAND
THESE INSTRUCTIONS!
and go to www.knowbeforeyoufly.org
Vista FPV Quadcopter
Flight Battery
Spare Blades
(2 black, 2 color)
AAA Batteries (4)
Controller
Camera Wire
Camera
with
Memory
Card
USB Charger
Radio Controlled
Quadcopter
CHARGING
Plug the charger into a USB port or AC adapter (not included) as
shown and connect the battery. The charger LED is steady on when
charging. The LED flashes when charge is complete.
NEVER leave the battery unattended while charging.
DO NOT allow the USB port to power down while the charger
is connected to the battery.
ALWAYS unplug the charger from the USB port and the battery
when charging is complete.
NEVER charge a puffed or damaged battery.
INSTALL BATTERIES IN THE CONTROLLER
Remove the screw and
slide the cover down to
insert the included 4
AAA batteries.
INSTALL THE CAMERA
1. Carefully slide the camera onto the camera mount until you feel
it click into place.
2. Connect the included camera wire to the camera and to the
quadcopter. The plugs can only be connected one way. Look
closely at the photos to see the orientation of wire colors.
TO PREVENT MOTOR DAMAGE ALWAYS BE SURE THE THROTTLE IS
OFF WHEN THE BLADES ARE OBSTRUCTED OR CONTROL IS LOST.
Question and Answer IconNeed help?

Do you have a question about the Hobbico VISTA FPV and is the answer not in the manual?

Hobbico VISTA FPV Specifications

General IconGeneral
BrandHobbico
ModelVISTA FPV
CategoryQuadcopters
LanguageEnglish

Summary

Flying Operations

Flying Basics

Learn how to take off, control altitude, and maneuver the quadcopter using basic flight commands.

Dual Rates

Adjust control sensitivity for different flight conditions and pilot preferences.

Troubleshooting

Flying Problems

Solutions for issues encountered during drone flight operations.

Video Problems

Troubleshooting steps for issues related to video recording and file management.

Part Replacements

Blade Replacement

Instructions for safely removing and installing rotor blades.

Prop Shaft Replacement

Guidance on replacing the propeller shaft and gear.

Motor Replacement

Steps for removing and installing drone motors.

Flight Control Board Replacement

Procedure for replacing the main flight control board.

Battery Precautions

LiPo Battery Safety

Essential safety guidelines for handling and charging lithium polymer batteries.

Safety Precautions

General Operating Safety

Key safety rules to follow when operating the quadcopter.

SLT Compatibility

Information on transmitter compatibility and setup for SLT systems.

Regulatory Compliance

FCC Requirements

Details on FCC compliance rules and potential interference issues.

CE Compliance

Information regarding European Union compliance and disposal instructions.

Related product manuals