Hobby King ORX TX10i - User Manual

21cm

Summary

Introduction

Safety Symbols and Guidelines

Safety information and symbols to ensure safe operation and prevent damage, injury, or death.

Binding Procedure

Binding Steps and Notices

Airplane Setup: Servo Functions

Servo Setup

Adjusting servo reverse, end points, and subtrim for all 10 channels.

Servo Reverse Function

Dual Rate and Exponential

Throttle Curve

Model Setup

Model Select

Selecting a model from the transmitter's memory.

Type Select

Changing the model type (airplane, glider, helicopter, multicopter).

Model Name

Model Reset

Bind Procedure

RX Binding Status

System Setup

Trainer Mode

Connecting two transmitters for training, with master/slave control options.

System Settings

Firmware Version

Displays current firmware version and provides instructions for updating the system firmware.

RF Module Version

Shows RF module version and guides the process for updating the RF module.

RF Module Update

Factory Reset

Hobby King ORX TX10i Specifications

General

Brand	Hobby King
Model	ORX TX10i
Category	Receiver
Language	English