Need help?Do you have a question about the Hobby-Lobby Telemaster 40 Deluxe and is the answer not in the manual?
Assembling the firewall sections and installing blind nuts.
First major glue-up of fuselage components using slow-curing adhesive.
Pre-assembling and installing the fuselage tail section components.
Assembling landing gear mount and float hard point parts.
Assembling and installing the electric motor mount.
Installing and shaping the elevator joiner parts EJ-A and EJ-B.
Preparing rudder parts and assembling the horn mount.
Preparing wing platform, filler, and laminating the wing joiner.
Preparing false leading edge and pinning wing structure to the building board.
Assembling trailing edge, sheer webs, and spar box caps.
Tack gluing sheer webs and ribs, ensuring alignment.
Fitting ribs to leading edge and applying glue to the main wing structure.
Shaping the leading edge perfectly flat using templates for proper fit.
Assembling flap base, hard point, leading edge, and ribs.
General| Channels | 4 |
|---|---|
| Servos | 4 |
| Wingspan | 72 inches |
| Engine Size | 0.40 - 0.46 cu in (6.5 - 7.5 cc) |
| Radio | 4-channel |
| Construction | Balsa Wood |
To Next Page
