Hobby People activator 50 User Manual

1
ACTIVATOR 50 CHARGER USER’S GUIDE
The Activator 50 Multi-Chemistry Intelligent Charger is a high-performance, micro
processor controlled charger with built-in Lithium cell balancer. The Activator 50 is
suitable for charging Li-Io, Li-Po, Li-Fe, Ni-Cd, Ni-MH and Pb (Lead Acid) batteries from
an 11 to 18V DC or 100 to 240V AC power source. With a maximum internal circuit
output power of 50W and a variable charge current of up to 6.0A, the Activator 50
is a versatile and easy-to-use charger that works with most batteries used in the
hobby today. The Activator 50 also has cycling capability and can also discharge.
XH balance ports are built-in, so balancing Lithium packs is easy. And of course,
other balance adapters are available if needed. Also available separately is a
temperature sensor for added security, giving you the ability to monitor your
battery’s temperature during the charging or discharging process.
USER’S GUIDE

Hobby People activator 50 Specifications

General

Brand	Hobby People
Model	activator 50
Category	Battery Charger
Language	English

Summary

USER'S GUIDE

Service and Support

Contact information and support procedures for the charger.

Detailed Features

Comprehensive overview of the charger's capabilities and functions.

Overview and Specifications

General description of the charger, its features, and technical specifications.

Warnings and Safety Notes

Critical safety precautions and guidelines for using the charger.

Recommended Safe Charging-Discharging Values

Table of safe voltage and current values for various battery types.

Connections

Instructions for connecting the charger, battery, and power source.

Pro Tips

Helpful advice and best practices for operating the charger.

Programming Flow Chart

Visual guide to the charger's programming menus and options.

Navigating Programming Menus

Explanation of how to use the charger's buttons to navigate menus.

Initial User Parameter Setup

Guide to configuring essential user settings before operation.

LiXX V.Type Menu

Configure the type of Lithium battery (Li-Fe, Li-Io, Li-Po).

Li-Po, Li-Io, Li-Fe Chk Time Menu

Set time limit for auto-detecting Lithium battery cell count.

Ni-MH Sensitivity D.Peak Menu

Adjust trigger voltage for Ni-MH charge termination.

Ni-Cd Sensitivity D.Peak Menu

Adjust trigger voltage for Ni-Cd charge termination.

Safety Temp Cut-Off Menu

Configure temperature limit for safe charging.

Waste Time Menu

Set delay between charge/discharge cycles for cooling.

Safety Timer Menu

Set automatic safety timer for charging processes.

Capacity Cut-Off Menu

Set maximum charge capacity limit.

Key Beep - Buzzer Menu

Control audio feedback functions of the charger.

Input Power Low Cut-Off Menu

Set low voltage cut-off for DC power source.

Lithium Internal Resistance Testing

Procedure for testing the internal resistance of Lithium batteries.

Lithium Battery Programming

Detailed instructions for charging, discharging, and storing Lithium batteries.

Lithium Battery Standard Mode Charging

Charge Lithium batteries without a balance connector.

Lithium Battery Balance Mode Charging

Balance charge Lithium batteries with a balance plug.

Lithium Battery Fast Mode Charging

Speed up Lithium battery charging by reducing CV phase.

Lithium Battery Storage Mode

Prepare Lithium batteries for long-term storage at optimal voltage.

Lithium Battery Discharge Mode

Discharge Lithium batteries to a specific voltage level.

Lithium Voltage Balancing Monitoring

Monitor individual cell voltages during Lithium battery operations.

Ni-Cd/Ni-MH Battery Programming

Instructions for charging, discharging, and cycling Ni-Cd and Ni-MH batteries.

Ni-Cd/Ni-MH Battery Charging

Charge Ni-Cd or Ni-MH batteries in AUTO or MANUAL modes.

Ni-Cd/Ni-MH Battery Discharging

Discharge Ni-Cd or Ni-MH batteries to a set voltage.

Ni-Cd/Ni-MH Battery Cycling

Condition Ni-Cd/Ni-MH batteries to maintain performance and prevent memory effect.

Pb (Lead Acid) Battery Programming

Instructions for charging and discharging Lead Acid batteries.

Pb Battery Charging

Charge 2 to 20 volt Lead Acid batteries.

Pb Battery Discharging

Discharge Lead Acid batteries to a specific voltage.

Save/Load Programming Data

How to save and load custom battery programming presets.

Saving Programming Data

Save current battery settings as a programmable preset.

Loading Programming Data

Load previously saved battery programming presets.

Process Information

Displays and explanations of real-time charging/discharging data.

Error Messages

Troubleshooting guide for common error codes and their meanings.

Blank Programming Data Sheets

Printable sheets for recording battery programming parameters.

Warranty and Liability Information

Details on product warranty, limitations, and service procedures.

Warranty Service Information

Steps and contact details for requesting warranty service.