1
CONTINUED
WASP EP FEATURES
ASSEMBLY INSTRUCTIONS
Check out our website for more information about other exciting Sport Flyers by Hobby People products!
WWW.HOBBYPEOPLE.NET
Wing Span: 42.9 Inches (1090mm)
●
Wing Area: 378 Square Inches (24.41dm
2
)
●
Length: 33 Inches (838mm)
Weight RTF: 16 Ounces (454gr)
●
Wing Loading: 6.1 Ounces/Square Foot (19gr/dm
2
)
Functions: Elevator, Rudder, Throttle and Ailerons (Optional)
●
Radio Required: 3-4 Channel or More w/2-4 Micro Servos and Micro Rx
Motor Required: KMS 31/21 Brushless Outrunner
●
ESC Required: 18Amp Brushless
●
Battery Required: 2 Cell 1320mAH LiPO
●
Full-Function, Four-Channel Electric-Powered Aircraft
●
Carbon Fuselage Boom with Laser-Cut, Factory-Assembled Wood Framework
●
Molded Foam Wing
●
Two-Piece Wing for Easy Transportation
●
Lightweight Foam and Carbon Construction
●
Flies on Many Affordable Power Systems
●
Can Be Setup for 3- or 4-Channel Control (For Training or Aerobatics)
●
Includes all Necessary Hardware
●
Fast and Easy Assembly - Over 75 High-Resolution Digital Photos to Guide You
Made in China
The Sport Flyers by Hobbypeople WASP EP
is sold exclusively in the USA by
Hobby People
18480 Bandilier Circle, Fountain Valley, CA 92708
All contents Copyright © 2006, Hobby People
Version 1.0 July 2006
Kit Product Number 160521
WASP is designed for the Park Flyer Pilot. This durable little plane is affordable, easy to assemble, lightweight, and fun to y. And best of all, you
can set it up to match your ying skills and interests. The wing can be built with dihedral or at, and can have ailerons for banking, or just rudder.
It's durable too. The fuselage boom is carbon ber and the framework is all light-plywood. The wing and tail are lightweight foam that can take a lot
of abuse and are easily repaired if damaged on one of those unexpected meetings with terra-rma. The WASP is what fun park ying is all about:
affordable, low-effort planes that are durable and fun. It's unique, it's customizable, it's the WASP.
To Next Page
Need help?
General