11-2
11.2 Ventilation
11.3 Upkeep
For safety reasons, the spare parts
for heating devices must conform
with the manufacturer's instructions.
They must be installed by the manuf-
acturer or an authorised representa-
tive.
Rules for greasing and oiling:
• Have the swinging lever bearings greased after
every 2,000 to 3,000 kilometers driven.
• Grease the bearing spaces on the casing of the
overrunning system.
• Oil movable parts such as bolts and joints.
• Grease the movable parts of the overrunning
system after every 5,000 kilometers driven.
• Check to see that the stationary parts of the
shearing rod are not jammed.
• Clean and oil all movable and stationary parts
at regular intervals.
Sufcient ventilation and de-aeration of the vehi-
cle interior is essential to maintaining a comfor-
table climate. In addition, corrosion damage from
sweat residue can be avoided.
Sweat residue forms most readily
- in tight spaces,
- from the breath and perspiration of the passen
gers,
- by carrying in damp clothing,
- when operating the gas cooker.
Ensure sufcient air circulation to pre-
vent damage from the collection
of sweat residue!
Cleaning the exterior
The vehicle should not be washed more often
than necessary.
Only wash the vehicle at specially
designed wash sites.
Use cleaning solvents as sparingly as
possible. Aggressive cleaners such
as rim cleaner pollute our environment.
Do not use cleaners which contain
solvents.
To Next Page
Loading...
Need help?
General
